Product Description :
Elastic, liquid plastic isolation material ensuring waterproofing. Supes transforms into elastic, impermeable, resistant linoleum and is a long lasting isolation material providing the exact solution for water isolation.
Properties :
Plastic isolation material ensuring waterproofing
Filling and Packaging Information :
20 Kg
Application Area :
Reliably applied on concrete, priming, brick, tile, briquette, ytong and galvanized sheet surfaces.
Dilution :
Paint base should be diluted 100% with water and dilution should be carried out for middle and finishing layer.
Application :
Supes must be applied on moisture free, dry and clean surfaces. Dilute with water at the rate 5-10% and apply a paint base and then, apply two layers without diluting it.
Clean The Surface Of The
Apply with brush or roller
Slim water
Don't Freeze To Protect
Mix
See Technical Bulletin
Drying Time :
Wait approximately for 12 hours between each layer and apply on the surface at reverse direction.
Consumption :
Vertically 750 gr/m2, horizontally 1,5 kg/m2.
Storage :
Keep in a cool place in its unopened packing for 1 year away from frost.
DANGER AND SECURITY APPLICATIONS
R22. Harmful if swallowed.
R34. Can cause burnt.
R43. Can cause sensitivity in case of contact with skin.
R50. Very toxic for aquatic organisms.
S2. Keep out of reach of children.
S7. Keep in tightly sealed containers.
S24/25. Avoid contact with skin and eyes.
S26. In case of contact with eyes, wash with plenty of water and consult with a specialist.
S28. In case of contact with skin, wash with plenty of water.
S29. Do not drain to sewer system.
S37. Wear suitable protective gloves.
S46. If swallowed, immediately consult with a specialist and show him the container or label.
